AVR Microcontroller Projects

The AVR microcontroller from ATMEL is widely used in embedded applications. The below list of AVR Microcontroller Tutorials and AVR Projects helps you to learn AVR series of microcontrollers  from very basic level to advanced applications. Most of these projects are built with the ATmega16/Atmega32 Microcontroller and will be programmed using the Atmel Studio. All projects and tutorials are explained with neat circuit diagram, code and hardware demonstration.

We at Circuitdigest have worked on a lot of PCB projects, but have consistently faced a…

In this tutorial, we are going to talk about fuses. Back when I was in college and learning about all the cool things in…

GPS modules are widely used in electronics applications to track the location based on longitude and latitude…

According to researchers from Pen state University, humans are more likely to trust machines over people, which is likely…

DC motors are the most widely used motors. These motors can be found almost everywhere from small projects to advanced robotics…

Hall sensors works on the principle of Hall Effect proposed by Edwin Hall in 1869. The statement proposed says, “The Hall…

Pulse Width Modulation (PWM) is a powerful technique where width of the pulse is changed by keeping the frequency constant. The…

Atmega16 is a low cost 8 bit microcontroller and comes with more number of GPIO’s than its previous version of microcontrollers…

Every digital clock has a crystal inside it to keep track of time. This crystal is not only present in the clock but also…

Here we will be building yet another project with AVR Atmega16 Microcontroller. If you are new to AVR microcontrollers then you…

One common feature that is used in almost every embedded application is the ADC module (Analog to Digital Converter). These…

Stepper Motors are DC brushless motors which can rotate from 00 to 3600 in steps. Stepper motor uses electronic signals to…